Connect to eduroam from a Windows computer

To help staff and students of the James Hutton Institute connect to the eduroam wireless network, this page provides instructions for connecting from a Windows computer.

These instructions should be followed whilst onsite at the Aberdeen or Dundee sites of the James Hutton Institute.

Visitors to the James Hutton Institute who wish to use eduroam should have already setup their device based on their home site’s instructions before visiting.

• Download and open the eduroam installer from the list below depending on the version of Windows you have, and open it from your Windows computer (you could copy the installer over using a USB stick for example).

  Windows 10 eduroam installer [1]

  Windows 8 eduroam installer [2]

  Windows 7 eduroam installer [3]
   

• At the “Welcome to the eduroam installer” screen, click “Next” and confirm that you are a member of the James Hutton Institute by clicking “OK”.
• When prompted to enter your user credentials, enter the following and click on the “Install” button:
  Username: Your Hutton email address. For example james.hutton@hutton.ac.uk
  Password and Repeat password: Your Hutton password.

• After a few seconds the installation should be complete and you should be connected to eduroam. Click the “Finish” button.